R⁴ Radial Cutter

• No stress on the components during all processes. Even the most delicate components are processed with marks <3% cross intersectional deformations
• The first machine with continuous adjustment of different pitches 2.5 – 15.0 mm, Cutting up to 30.0 mm
• Standard crimping shape applicable to all typical pcb’s
• Working with rolls and ammo packs
• Short crimping with optional tool (Form B)
• Easy switch-over from 2 to 3-leaded components
• Continuous adjustable crimping depth below pcb, and lead length
• Expand the pitch up to 2.5 mm
• NEW: Up to 2.5mm compensation in height differences on the tape – only Form C
• Processing speed: 3600 CPS/h - with compensation 2000 CPS/h
• PLC controlled machine with pre-selection counter and automatic operation control
• Low maintenance required
• Silent operation
• Tape pitch from 12.7 to 15 mm with simple switching
• The setup values of the axis can be saved in a program.
• 48 individual databases can each hold 100 programs. Therefore 4800 geometries can be stored in the panel.
• The axis numbers on the screen correspond to the written numbers on the machine. This gives the operator a better overview.
• Process reliability: The production can just be started if the positions of all axes correspond to the position of the chosen program.
• Also during production, the axes are permanently checked. Is the position of one axe changing, the machine stops its process.
• New programs can be written very easily. There is only one button needed to write all position data’s into the recent recipe.

PDF-Download

Detailed information (only with registration - LOGIN)