NCG3 Axial Cutter
-
-
Specifications
-
Specifications
-
Specifications
-
Sample Components
-
Control Panel
Fully automatic machine to cut, bend and crimp taped or loose axial.
The NCGG3-Cutter is a fully automatic machine to cut, bend and crimp taped or loose axial components. The NCG3-Cutter is the same concept as the G3-Cutter. Instead of setting up the 5 or 6 axis manually, it is done by servo motors.
Die Vorteile der POLYVER Verarbeitungstechnik:
- Setup time less than 10 sec.
- Highest repetitive precision
- 100% Stress free on all processes
- Smallest cross-sectional deformation, cause of the smooth processing
- Minimal mechanical knowledge requested
- Best choice for multi-shift operations
- Best choice for small amounts with high diversity
- Control unit SIEMENS or B&R
- MRX belt component feeding unit
- Feeds in also slightly bent leads
- Eliminates jamming in the unit
- Independent from component pitch
- Great flexibility because of continuous adjustable possibilities
- Easy set-up and operating; storage capabilities of the geometries
- Tool exchange in less than 2 minutes
- Processing of horizontal and vertical components on the same machine
- Wide setting range – Pitch size up to 65mm
- Large variety of crimping and forming tools
- Capabilities to process from roll or ammo pack
- Automatic production with preset counter
- Maintenance assistance
PDF-Download
Setup precision: The setup precision of the axis is 0.1mm. All axis values can be stored in the database of the B&R panel.
5000 data records: Records can be stored in recipes of your choice.
Synchronization: No synchronization of the data necessary. The axis are always on the actual value of the data set.
Process reliability: The correct position of all axes is mandatory to start the production. If the value of an axis does not match the value of the data set, the machine cannot be started. The value will be displayed in red on the screen. Full process reliability is hereby given.
Backup: The records on the panel can be stored on a USB stick for data safety purposes. If the panel should break down, the records and all necessary software will be save.